3D Aluminum core panel
This new product called 3D core Aluminum panel ,or improved
honeycomb panel, that does not incur the expensive unit price of
aluminum honeycomb panel but is stronger and has better quality than the
latter. It is fully composed of metal materials without plastic
ingredients, 100% environmentally friendly and fireproof Grade A2 EN13501.
Meanwhile, it has the feature of easy processing like the aluminum
composite panel. The patented makes use of its unique physical structure
with the small amount of aluminum material used. It is lighter than acp
and has a flatter panel surface. Additionally, there are a variety of
outer look selections available. The perfect surface presentation can be
shown as a stone texture, wood texture or mirror surface.
Specifications:
Test items
flat tension strength | Flat shearing strength | bending strength | Drum peel strength | Reference |
4.39MPa | 0.85MPa | 4mm 161.9MPa | 102.7N/mm | GB/T 1456-2005 |
3D Metal panel specification:
panel thickness | front aluminum thickness | width | length | Coating surface |
4.0mm | 0.5mm~0.7mm | 1220mm | L | PE/PVDF |
1500 | Wooden(PE/PVDF) | |||
1000 | stone (PE/PVDF) | |||
Brush/mirror |
1.During sloting,according to the required edge width,position the panel and adjust the depth of the cuting device in order to cut to the depth of the aluminum.Then,push at a proper speed and acoid any sudden increase or decrease of speed or it will result in an unsmooth slot surface. Sloting shall be cut to the depth of the aluminum or it will affect the paint surface at the bending parts(such as paint axplosion or cracking).The aluminum clad should not be left on the surface of the slot or unevenness with different slot widths will occut during bending.
2.During bending, use the hands to gently lift the slotted edges. Move gently or the quality of bent surface will be affected.
Slotting Drawing Drawing of being Folded and Bended
